Phrozen Aqua 4k Gray Resin

Phrozen’s new Aqua 4k Gray Resin resin is designed to showcase 3D models in high resolution and works best with the Sonic Mini 4K / Sonic Mighty 4K 3D Printer. The formula is created to allow every designer to print a replica of their designs with the added benefits of no shrinkage and low odor.

SPECIFICATIONS: Phrozen Aqua 4k Gray Resin

Density: 1.1 g / cm3
Viscosity: 221 cps
Tensile Strength (Break): 1.9 Mpa
Elongation: 6 %
I-ZOD Impact Strength: 6.42 KJ/m2
Surface Hardness, Shore D: 75 Shore D

PRECAUTIONS: Phrozen Aqua 4k Gray Resin

Way to Rinse: Clean with alcohol spray with an air gun. DO NOT immerse the model in alcohol for a long time.
Use and preserve resins at room temperature, and in dark and ventilated conditions
Shake well before each use.

After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
Keep resin away from kids and away from direct sunlight exposure.

Wear gloves and masks during the operation of resins. Wash with plenty of water for direct skin or eye contact with resins.
DO NOT dump resin. Please cure it and treat it as general plastic garbage.

After receiving your Phrozen resins, we strongly recommend you finish them as soon as possible as unopened resins only have a shelf life of one year.